EtherDevice Switch EDS-405 Series von Moxa: Industrial 5-port Unmanaged Redundant Ethernet Switches Device Server, Console Server, Terminal Server, RS232 over IP, RS422 over IP, RS485 over IP, USB over IP, Seriell zu Ethernet

BellEquip GmbH
 

EtherDevice Switch EDS-405 Series
Industrial 5-port Unmanaged Redundant Ethernet Switches

EDS-405

Plug-n-Play, Ring Redundancy solution (recovery time < 300 ms)
Power failure and port break by relay output alarm
10/100M, Full/Half-Duplex, MDI/MDI-X auto-sensing
Redundant dual DC power inputs
DIN-Rail or panel mounting ability
-40 to 75°C operating temperature (-T models)
Long haul transmit distance of 40 km and 80 km (on request)


Introduction


The MOXA EDS-405 Series—the newest generation of EtherDevice™ Switch— includes four basic models: EDS-405, EDS-405-MM-SC, EDS-405-MM-ST, and EDS-405-SS-SC. All EDS-405 Series products are 5-port Ethernet switches specially designed for industrial automation and control systems, and they also come with plug-n-play MOXA Turbo Ring, which is used to establish an Ethernet redundant ring topology. Turbo Ring can automatically transmit over a redundant path segment in less than 300 ms, increasing the reliability of your system.

The built-in relay output function helps you monitor each port's link status, each power input's status, and the health of the Turbo Ring topology, giving your maintenance engineers a headstart when emergency situations arise.

The redundant dual DC power inputs help insure non-stop operation, and flexible installation options by DIN-Rail or wall mounting make it easy for you to fit EDS-405 series switches into any workspace.


Features

High performance network switching technology
Plug-n-play, ring redundancy solution
10/100BaseT(X) (RJ45), 100BaseFX (SC/ST optical fiber connector, Single/Multi mode)
Supports IEEE 802.3/802.3u/802.3x
Store and Forward switching process type
10/100M, full/half-duplex, MDI/MDI-X auto-sensing

Industrial grade reliability
Power failure, port break alarm by relay output
Redundant dual DC power inputs
Line-Swap Fast Recovery (patented)

Rugged design
Standard temperature range (0 to 60°C) and extended temperature range (-40 to 75°C) models available
IP30, rugged high-strength metal case
Class 1 Div. 2/Zone 2 Certified for hazardous location
DIN-Rail or panel mounting ability

Recommmended Accessories
DR Series DIN-Rail 24 VDC Power Supplies

BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Österreich / Austria • Tel.: +43 (0)2822 33 33 990 • Fax: +43 (0)2822 33 33 995
Internet: www.bellequip.at • E-mail: info@bellequip.at

Direkte LINKS zu unseren Produkten